Sunday, 29 December 2013

SPEC OIL TDS ELECTRICAL CLEANER TYPE 3



SPEC OIL ELECTRICAL CLEANER TYPE 3

DESCRIPTION
Degreaser Type 3 conforms to SABS specification 1365 Type 3. It is a clear colourless fluid designed to evaporate at a predetermined rate thereby. Preventing excessive cooling which can result in moisture from the atmosphere being deposited on surfaces resulting in electrical failure upon drying it leaves a clean uncontaminated surface.

APPLICATION
For cleaning electrical components (other than switchgear) of electrical machinery and general metal cleaning.

USES
Solvent Degreaser Type 3 is a blend of high quality solvents which will remove most types of contamination in electrical machinery. Oil and grease deposits will be taken into solution while inorganic soil such as dust, carbon and metallic particles will be wetted and displaced from the surface.

METHOD OF USE
Application can be by brush, dip and spray. Soaking tanks should have well-fitting lids to prevent evaporation.
Spraying should be carried out in well ventilated areas or spray booths having suitable extraction fans.
Components heavily coated with oil or grease should be rinsed in a clean rinsing tank to prevent an oil film remaining on the surface.

EFFECT ON MATERIALS
This product is non-corrosive to metals and will have no detrimental effect on normal insulating materials, high quality paints and plastics. There could however be an effect on “Perspex”. Contact with natural rubber will cause slight swelling and prolonged immersion should be avoided.



TYPICAL CHARACTERISTICS
Alkalinity As (NA, CO) mg/It MAX
90
Acidity AS (HC1) mg/It MAX
10
Free Chlorine
Nil
Flash Point ◦C MIN
100
Residue on Evaporation Mg/It MAX
70
Water Content MG/It MAX
120




No comments:

Post a Comment