SPEC OIL CIRCULATING
OIL 32 TDS
DESCRIPTION
Circulating Oil is premium quality, solvent refined,
high viscosity index and mineral oils specially chosen for their ability to
provide superior lubrication in a wide range of industrial applications.
This product is formulated with superior base oils and
contains oxidation and rust inhibitors, defoamers and anti-wear additives. It
is a high quality circulating oil and general purpose lubricant. It has the
ability to rapidly separate from water, prevention of emulsion and sludge build
up, which hampers lubricating efficiency. It has marked resistance to foaming
and good air release which is important in circulation systems.
APPLICATION
It is primarily used for continuous recirculation
where maintenance factors ensure low leakage losses. Specialized uses include
hydraulic systems, certain marine turbines as well as their associated
reduction gears, These oils find application in bearings and industrial enclosed
spur or bevel gears, provided EP is not required, Circulation oil applications
include, ring collar and chain-oiled bearings, splash oiling and bath systems.
It is particularly suited to the lubrication of antifriction bearings of paper
mill dryer rolls, plastic film calendars and paper corrugators where their
excellent resistance to the formation of harmful deposits produces outstanding
benefits.
- Plain and rolling element
bearings
- Enclosed spur, helical, bevel
& worm gearboxes where a non-additive mineral oil approved by the gear
manufacturer
- Machine tool circulatory systems
- May be used in industrial
applications where loadings and temperatures are moderate
PERFORMANCE FEATURES
Good oxidation and
thermal stability:
Natural resistance to the formation of sludge and
other harmful products of oxidation.
Long oil life.
Water shedding
properties:
Circulating oils have excellent water separation
properties. Excess water can be drained easily from lubrication systems. (Water
can greatly accelerate surface fatigue on gear and bearing interfaces and
promote ferrous corrosion on all internal surfaces. Water contamination should
be avoided or removed as quickly as possible after occurrence).
High Viscosity Index:
Minimal change of oil viscosity over the operating
temperature range.
KEY PROPERTIES
CIRCULATING OIL
|
32
|
100
|
150
|
220
|
Viscosity
Grade (ISO 3448)
Viscosity @ 40 ◦C
Viscosity @ 100 ◦C (IP 71)
Viscosity Index (IP 226)
Density 20 ◦C kg/l (IP 365)
Flash Point ◦C (Min)
Pour Point ◦C (Max)
|
32
32
5.4
100
0.868
222
-12
|
100
100
11.2
95
0.877
225
-9
|
150
150
14.8
95
0.883
243
-9
|
220
220
19.2
95
0.887
243
-9
|
No comments:
Post a comment